Assessment Validation: A Detailed Guide to Validate Assessments
Assessment Validation: A Detailed Guide to Validate Assessments
Blog Article
Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.
Even though we've covered validation in depth, let’s revisit its definition. ASQA defines validation as a quality review of the assessment process.
Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
We are required by the standards to carry out two types of validation.
The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.
The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.
Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.
Breaking Down the Two Types of Assessment Validation
The Meaning of Assessment Validation
As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.
Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.
This article will focus on assessment tool validation.
Methods for Conducting Assessment Tool Validation
Having discussed the two types of validation, let’s delve into assessment tool validation.
When to Conduct Assessment Tool Validation
Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.
There's no requirement to wait for the next validation schedule in your 5-year cycle. Validate new resources promptly to ensure they’re appropriate for students.
Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:
- you update your resources
- new training products get added on scope
- training product updates are reviewed against your course
- identify your learning resources as a risk during your risk assessment
ASQA applies a risk-based regulation approach, expecting RTOs to do regular risk assessments. Hence, student complaints about learning resources are a good reason for assessment tool validation.
Which Training Products Should You Validate?
Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.
Essential Resources for Assessment Tool Validation
Learning Materials
Given that you are validating your assessment tools, you will need the complete array of your learning resources:
Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.
Learner/student workbook – during validation, check if it's suitable as an assessment tool. Ensure instructions are clear and answer fields are sufficient. This is a common gap.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates created apart from the workbook and marking guide. Validate them to ensure they fit the assessment task and address unit requirements.
Validation Team
Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.
Collectively, your validation panel must have:
Vocational competencies and current industry skills that relate to the unit being validated
Current expertise and skills in vocational teaching and learning
One of these training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or its replacement
Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.
Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.
We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:
Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Requires Checking?
As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.
Key Principles of Assessment
Fairness – Are equal opportunities and access ensured in the assessment process?
Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?
Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Evidence Rules
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Do the assessment tools reflect current units of competency and modern industry practices?
Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these website requirements.
To prevent using learning resources that do not address some unit requirements, ensure you adhere to these guidelines:
Practice Your Teachings
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
nappy change
prepare bottle, bottle feed babies and clean equipment
prepare solid food and feed infants
respond properly to infant signs and cues
prepare and settle infants for rest
monitor and support age-appropriate physical exploration and gross motor skills
Getting students to describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Heed the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.
All or Nothing
Observe the lists. As mentioned above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What information might be included in a work package?
Possible answers could include:
Needed materials
Related costs
Length of activities
Assigned functions and responsibilities
If an assessment item demands multiple answers, specify the number of answers required from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
The same applies to assessment items with double-barrelled questions or those asking for multiple answers simultaneously. These can confuse both students and assessors, as shown in the sample question below:
Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – isolating the work area, engineering, personal protective equipment
Work area and ground conditions – eliminating hazards, isolation, use of engineering controls
People – isolating, use of engineering controls, administration
Structural hazards – substitution, isolation, use of engineering controls
Chemical hazards – isolation, engineering, administrative controls
Equipment or machinery – isolation, engineering, administrative controls
Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.
Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.